How to Draw a Grasshopper
1 / 12
Start with the abdomen, the largest of the three masses.
The abdomen should be the largest of your three ovals.
Drawing on paper instead?
We straighten and clean up the photo for you. Paper counts exactly the same.
About this drawing
A grasshopper is four ordinary legs and two extraordinary ones: the hind pair fold into a Z taller than the whole body, thigh up, shin down, and that Z is the drawing - everything else is a long face, longer antennae, and wings folded flat along the back like a closed tent.
Like every insect here, it is three ovals in a row - abdomen, thorax, head, in descending size - with all six legs and every wing attached to the middle one.
Step by step
-
Step 1
Start with the abdomen, the largest of the three masses.
Insects are drawn back to front: the abdomen is the biggest of the three segments and it sets the scale for everything, so it goes down first, in one motion, larger than instinct suggests.
Watch out Starting at the head and running out of room behind.
Check The abdomen should be the largest of your three ovals.
-
Step 2
Add the second mass, the thorax, ahead of the first.
The thorax is the machine room - every leg and every wing attaches to it and to nothing else. Draw it distinct from the abdomen, with a visible waist between the two on most species.
Watch out Merging thorax and abdomen into one blob.
Check You should see a pinch where thorax meets abdomen.
-
Step 3
Place the head at the front of the row.
Insect heads are small - usually the smallest of the three masses by far - and most of what you think of as the head is actually eyes. Keep it little and let the eyes dominate it.
Watch out An oversized head, which turns the insect into a cartoon.
Check The head should be clearly the smallest segment.
-
Step 4
Place the two dome eyes.
Compound eyes wrap the sides of the head like a motorcycle helmet's visor - two big domes taking up most of the head's surface. Their size is the single most insect-like thing you will draw.
Watch out Small forward-facing eyes, which mammalise the face.
Check The two eyes together should cover most of the head.
-
Step 5
Sweep the antennae out in single strokes.
Two strokes, drawn fast and matching - the antennae are the insect's most delicate lines and they punish hesitation the way whiskers do. Draw the second by comparing it to the first.
Watch out Wobbly antennae built from short careful passes.
Check Both antennae should curve the same way, the same amount.
-
Step 6
Draw the near legs - three, and every one from the thorax.
All six legs come from the thorax - never the abdomen, which is the error that gives every beginner's insect away. Each leg is three straight segments with two visible joints.
Watch out Legs sprouting from the abdomen.
Check Every leg should trace back to the middle segment.
-
Step 7
Complete all six legs.
The far legs are partly hidden by the body, so they are drawn shorter and interrupted - which is what puts the near side in front. Compare their angles to the near legs rather than inventing new ones.
Watch out Far legs drawn full length, floating beside the body.
Check The far legs should be visibly interrupted by the body.
-
Step 8
Draw the wings so they cross the body outline.
Wings lie ON the body, crossing its outline - the overlap is the attachment, exactly as it was for fins and bird wings. Draw each wing as one shape from its thorax root.
Watch out Wings floating beside the body, touching nothing.
Check Each wing should visibly cross the body outline.
-
Step 9
Suggest the wing veins with a handful of lines.
Two or three structural veins per wing are enough - the eye tiles the rest. A fully veined wing goes grey and reads as stained glass rather than membrane.
Watch out Veining every cell of the wing.
Check Most of each wing should still be empty.
-
Step 10
Add the body pattern that says grasshopper.
Insect patterns follow the segments: stripes ring the abdomen, spots sit inside segment boundaries. Pattern that ignores the segmentation flattens the body instantly.
Watch out Pattern drawn across segment boundaries as if on flat paper.
Check Every stripe or spot should respect a segment edge.
-
Step 11
Draw whatever else a grasshopper carries.
Whatever identifies the species goes on last - a sting, a spot count, a horn - placed exactly and stopped early. One correct identifying mark beats five approximate ones.
Watch out Leading with the identifying detail before the build works.
Check The insect should read as its species at arm's length.
-
Step 12
Press harder on the keepers, remove the guides.
Weight the three segment outlines and the near legs, keep veins and far legs light, erase the guides. Depth in a drawing this small is mostly line-weight contrast.
Watch out Equal weight on near and far legs.
Check Near legs darker than far legs, everywhere.
What it looks like finished
The same drawing with every guide erased and only the lines you meant to keep, at the weight you meant them to be. If yours still has centre lines and blocking-in shapes in it, this is the step you have not done yet - and it takes about thirty seconds.
Yours will not look like this, and it is not supposed to. This is the construction with the scaffolding taken away, not a drawing somebody made to be admired - the point is to show you which of your lines were guides.
What this one actually teaches you
The skill underneath is drawing small without drawing timid: an insect rewards the same committed strokes as a horse, just shorter, and hesitation shows even more at this scale.
The grasshopper is the family's mechanism lesson: the folded jump leg is a machine drawn at rest, and its stored energy has to read on the page. It is the bucket-handle hinge again - a part that moves - scaled to a living spring.
Practise these: Line confidence Proportion Value range
What you need
A pencil and any paper, or a finger on the canvas above - nothing here needs special equipment. Keep the construction light if you are on paper, because the guides come off at the end.
If it's going wrong
If the jump legs look wrong, the Z is too shallow: the hind thigh angles UP above the body line before the shin drops - the fold should look spring-loaded.
If it reads as a cricket, shorten the antennae slightly and straighten the back: a grasshopper's antennae are shorter than its body and its posture is horizontal.
If the face is not reading, it is too round: a grasshopper's head is a tall oblong with the eye set high, more horse than fly.
Print the steps
Take it away from the screen. The step sheet prints on one page.
Questions people ask
- How do I draw a grasshopper's jumping legs?
- As a Z taller than the body: thigh angling UP above the back line, shin dropping to the ground. The fold should look spring-loaded - shallow zigzags read as walking legs.
- How is a grasshopper different from a cricket?
- Shorter antennae - less than body length - a horizontal posture, and daytime colours. A cricket's antennae sweep back longer than its whole body.
- What shape is a grasshopper's head?
- A tall oblong with the eye set high, more horse than fly, with the mouth at the bottom. A round head is the fastest way to lose the species.
- Can I draw a grasshopper on paper instead of the canvas?
- Yes - every step works on paper, and the printable sheet has the construction on one page and the finished sketch on the other. Photograph the result and it is measured like any canvas drawing.
- How many body parts does a grasshopper have?
- Three, in a row: abdomen biggest, thorax in the middle, head smallest. Getting that size order right is most of the drawing.
- Where do the legs attach on a grasshopper?
- All six to the thorax - the middle segment - and never to the abdomen. Legs off the abdomen are the error that gives every beginner insect away.
- Can a beginner draw a grasshopper?
- Yes - it is three ovals, six jointed lines and a pattern, with a finish-early step marked partway through so a hard day still ends with a complete drawing.
- How do I draw the wings on a grasshopper?
- As shapes laid OVER the body, crossing its outline, with two or three veins each. The overlap is the attachment; full veining turns membrane into stained glass.
- Why does my grasshopper look like a cartoon bug?
- Usually the head is too big and the eyes too small. Shrink the head to the smallest of the three segments and let two big dome eyes wrap its sides.