How to Draw a Grasshopper

13 nga hipanga ~12 min He uaua 2/5 Whakawhiwhinga, kāore he whakawhiwhinga

Ko te mea e tākaro ana koe i tēnei rā

1 / 13

Start with the abdomen, the largest of the three masses.

The abdomen should be the largest of your three ovals.

E tātuhi ana ki runga pepa?

Ka whakatūtū, ka whakamātauria e tātau te whakaahua mō koe. He ōrite tonu te tatau pepa.

Mo tēnei tātuhi

A grasshopper is four ordinary legs and two extraordinary ones: the hind pair fold into a Z taller than the whole body, thigh up, shin down, and that Z is the drawing - everything else is a long face, longer antennae, and wings folded flat along the back like a closed tent.

Like every insect here, it is three ovals in a row - abdomen, thorax, head, in descending size - with all six legs and every wing attached to the middle one.

He hipanga ki te hipanga

  1. Ka taea te whakahau 1

    Start with the abdomen, the largest of the three masses.

    Insects are drawn back to front: the abdomen is the biggest of the three segments and it sets the scale for everything, so it goes down first, in one motion, larger than instinct suggests.

    Whakawhanake Starting at the head and running out of room behind.

    Whakamātautau The abdomen should be the largest of your three ovals.

  2. Ka taea te whakahau 2

    Add the second mass, the thorax, ahead of the first.

    The thorax is the machine room - every leg and every wing attaches to it and to nothing else. Draw it distinct from the abdomen, with a visible waist between the two on most species.

    Whakawhanake Merging thorax and abdomen into one blob.

    Whakamātautau You should see a pinch where thorax meets abdomen.

  3. Ka taea te whakahau 3

    Place the head at the front of the row.

    Insect heads are small - usually the smallest of the three masses by far - and most of what you think of as the head is actually eyes. Keep it little and let the eyes dominate it.

    Whakawhanake An oversized head, which turns the insect into a cartoon.

    Whakamātautau The head should be clearly the smallest segment.

  4. Ka taea te whakahau 4

    Place the two dome eyes.

    Compound eyes wrap the sides of the head like a motorcycle helmet's visor - two big domes taking up most of the head's surface. Their size is the single most insect-like thing you will draw.

    Whakawhanake Small forward-facing eyes, which mammalise the face.

    Whakamātautau The two eyes together should cover most of the head.

  5. Ka taea te whakahau 5

    Sweep the antennae out in single strokes.

    Two strokes, drawn fast and matching - the antennae are the insect's most delicate lines and they punish hesitation the way whiskers do. Draw the second by comparing it to the first.

    Whakawhanake Wobbly antennae built from short careful passes.

    Whakamātautau Both antennae should curve the same way, the same amount.

  6. Ka taea te whakahau 6

    Draw the near legs - three, and every one from the thorax.

    All six legs come from the thorax - never the abdomen, which is the error that gives every beginner's insect away. Each leg is three straight segments with two visible joints.

    Whakawhanake Legs sprouting from the abdomen.

    Whakamātautau Every leg should trace back to the middle segment.

  7. Ka taea te whakahau 7

    Complete all six legs.

    The far legs are partly hidden by the body, so they are drawn shorter and interrupted - which is what puts the near side in front. Compare their angles to the near legs rather than inventing new ones.

    Whakawhanake Far legs drawn full length, floating beside the body.

    Whakamātautau The far legs should be visibly interrupted by the body.

  8. Ka taea te whakahau 8

    Draw the wings so they cross the body outline.

    Wings lie ON the body, crossing its outline - the overlap is the attachment, exactly as it was for fins and bird wings. Draw each wing as one shape from its thorax root.

    Whakawhanake Wings floating beside the body, touching nothing.

    Whakamātautau Each wing should visibly cross the body outline.

  9. Ka taea te whakahau 9

    Suggest the wing veins with a handful of lines.

    Two or three structural veins per wing are enough - the eye tiles the rest. A fully veined wing goes grey and reads as stained glass rather than membrane.

    Whakawhanake Veining every cell of the wing.

    Whakamātautau Most of each wing should still be empty.

  10. Ka taea te whakahau 10

    Add the body pattern that says grasshopper.

    Insect patterns follow the segments: stripes ring the abdomen, spots sit inside segment boundaries. Pattern that ignores the segmentation flattens the body instantly.

    Whakawhanake Pattern drawn across segment boundaries as if on flat paper.

    Whakamātautau Every stripe or spot should respect a segment edge.

  11. Ka taea te whakahau 11

    Draw whatever else a grasshopper carries.

    Whatever identifies the species goes on last - a sting, a spot count, a horn - placed exactly and stopped early. One correct identifying mark beats five approximate ones.

    Whakawhanake Leading with the identifying detail before the build works.

    Whakamātautau The insect should read as its species at arm's length.

  12. Ka taea te whakahau 12

    Anchor it with a shadow pool below.

    Two soft overlapping arcs under the legs are the whole ground - an insect is small enough that a full ground line overstates it. The shadow sits directly below the body's mass, slightly forward of the abdomen, and it is what makes six thin legs read as standing rather than dangling.

    Whakawhanake A hard ground line, which reads as a table edge at this scale.

    Whakamātautau The shadow should sit below the thorax and abdomen, not the head.

  13. Ka taea te whakahau 13

    Firm up the outline, rub out the guides.

    Weight the three segment outlines and the near legs, keep veins and far legs light, erase the guides. Depth in a drawing this small is mostly line-weight contrast.

    Whakawhanake Equal weight on near and far legs.

    Whakamātautau Near legs darker than far legs, everywhere.

He pēhea te āhua o te whakamutua

Ko te tātuhi ōrite me ia kaiārahi i whakakoretia, ā, ko ngā raina anake i hiahiatia e koe kia pupuri, i te taumahatanga i hiahiatia e koe kia pupuri. Mēnā kei roto tonu i ōna raina pū me ngā hanga ārai-i roto, ko tēnei te hipanga kāore i mahia e koe - ā, tata ki te toru tekau mā rua ngā taki.

The finished drawing of a grasshopper with the construction lines erased

Kāore e āhua nei a koe, ā, kāore e hiahiatia kia. Ko tēnei te hanganga me te whakawhāiti i te whakawhāiti, ehara i te tātuhi i hangaia e tētahi tangata hei whakamātautau - ko te take kia whakaaturia ki a koe he aha o o koe ngā raina kaiārahi.

Ko te mea e whakaako ana tēnei i a koe

The skill underneath is drawing small without drawing timid: an insect rewards the same committed strokes as a horse, just shorter, and hesitation shows even more at this scale.

The grasshopper is the family's mechanism lesson: the folded jump leg is a machine drawn at rest, and its stored energy has to read on the page. It is the bucket-handle hinge again - a part that moves - scaled to a living spring.

Ko te mea e hiahiatia ana e koe

A pencil and any paper, or a finger on the canvas above - nothing here needs special equipment. Keep the construction light if you are on paper, because the guides come off at the end.

Mēnā he hē te haere

If the jump legs look wrong, the Z is too shallow: the hind thigh angles UP above the body line before the shin drops - the fold should look spring-loaded.

If it reads as a cricket, shorten the antennae slightly and straighten the back: a grasshopper's antennae are shorter than its body and its posture is horizontal.

If the face is not reading, it is too round: a grasshopper's head is a tall oblong with the eye set high, more horse than fly.

Pānuitia nga hipanga

E tangohia ana i te mata. Ka tātuhia te pepa hipanga ki runga i tētahi pātaka.

Whakarere (US) A4paper size

Ko nga pātai e pā ana te tangata

How do I draw a grasshopper's jumping legs?
As a Z taller than the body: thigh angling UP above the back line, shin dropping to the ground. The fold should look spring-loaded - shallow zigzags read as walking legs.
How is a grasshopper different from a cricket?
Shorter antennae - less than body length - a horizontal posture, and daytime colours. A cricket's antennae sweep back longer than its whole body.
What shape is a grasshopper's head?
A tall oblong with the eye set high, more horse than fly, with the mouth at the bottom. A round head is the fastest way to lose the species.
Can I draw a grasshopper on paper instead of the canvas?
Yes - every step works on paper, and the printable sheet has the construction on one page and the finished sketch on the other. Photograph the result and it is measured like any canvas drawing.
How many body parts does a grasshopper have?
Three, in a row: abdomen biggest, thorax in the middle, head smallest. Getting that size order right is most of the drawing.
Where do the legs attach on a grasshopper?
All six to the thorax - the middle segment - and never to the abdomen. Legs off the abdomen are the error that gives every beginner insect away.
Can a beginner draw a grasshopper?
Yes - it is three ovals, six jointed lines and a pattern, with a finish-early step marked partway through so a hard day still ends with a complete drawing.
How do I draw the wings on a grasshopper?
As shapes laid OVER the body, crossing its outline, with two or three veins each. The overlap is the attachment; full veining turns membrane into stained glass.
Why does my grasshopper look like a cartoon bug?
Usually the head is too big and the eyes too small. Shrink the head to the smallest of the three segments and let two big dome eyes wrap its sides.