How to Draw a Cherry
1 / 12
Begin with the big shape.
It should fill most of the page with a margin all round.
Drawing on paper instead?
We straighten and clean up the photo for you. Paper counts exactly the same.
About this drawing
Cherries come in pairs, and the pair is the lesson: two spheres joined by stems meeting at one point, the far one half-hidden behind the near one, each catching the same light. It is the site's smallest composition exercise - two objects that must agree about overlap, light and scale.
Like every simple form on this site, it is one mass plus value: block it in, break the outline where the real thing does, then let light do the rest.
Step by step
-
Step 1
Begin with the big shape.
One shape, one motion. A slightly lopsided mass drawn confidently beats a perfect one assembled from nervous strokes, because you can correct a shape and you cannot un-see hesitation.
Watch out Building the mass from many small safe strokes.
Check It should fill most of the page with a margin all round.
-
Step 2
Break the outline so it is not a perfect oval.
Nothing organic is a perfect oval. Push the outline in and out where the subject actually does - the asymmetry IS the likeness.
Watch out Leaving the construction oval as the finished outline.
Check The outline should differ visibly from the oval underneath.
-
Step 3
Put a vertical and a horizontal through the middle.
Two light lines through the middle are the rulers for everything that follows. Without them the features drift off-centre a few millimetres at a time.
Watch out Skipping the axes because the shape looks simple.
Check The two lines should cross near the middle of the mass.
-
Step 4
Add the stalk.
Whatever sits on top attaches INTO the form, not onto its outline - it comes out of a dip or a mound, and drawing that junction is what attaches it.
Watch out Balancing the stalk on the outline like a hat.
Check The top feature should overlap the mass's outline.
-
Step 5
Draw the top hollow.
The hollow around the top is what makes the form read as having a top rather than an edge. One curve, and note which way it bows - it tells the viewer where their eye is.
Watch out Omitting the dip so the top sits on a flat line.
Check The dip should curve, not sit flat.
-
Step 6
Decide the light source now.
Pick a direction and commit. Every decision from here - shading, highlight, cast shadow - follows from this one, and changing your mind halfway is the classic way a drawing ends up lit from two directions.
Watch out Deferring the decision and shading by instinct.
Check You should be able to point at the light source.
-
Step 7
Put the shadow side in.
Work in one direction and build darkness in passes. Scrubbing back and forth gives an even grey - precisely the thing that makes a drawing look flat.
Watch out Scrubbing, and stopping two steps short of dark enough.
Check The dark side should be clearly darker than the mid tone.
-
Step 8
Keep the outermost edge light.
Leave a thin lighter strip right at the shadow-side edge - bounced light from the surface below. It is the single cheapest thing that makes a form read as round.
Watch out Running the shading tight to the outline.
Check A lighter line should separate shading from edge.
-
Step 9
Add the highlight.
One highlight, small, off-centre on the lit side. Two symmetrical highlights read as plastic; a big one reads as wet.
Watch out A large or doubled highlight.
Check The highlight should be smaller than your thumbnail.
-
Step 10
Draw the cherry texture.
Surface marks follow the form - they curve over the mass and fade near the highlight. Flat marks cancel the volume you just shaded into it.
Watch out Marks drawn flat across the curved surface.
Check Marks should bend with the surface.
-
Step 11
Add the shadow it sits in.
Darkest at the contact point, softer as it stretches away from the light. It anchors the object; without it everything you shaded still floats.
Watch out An even grey puddle not touching the object.
Check The shadow should touch the object's base.
-
Step 12
Press harder on the final lines and remove the guides.
Weight the silhouette, erase the axes and the oval, and leave the interior marks light. The weight difference is what makes it look deliberate.
Watch out Equal weight everywhere.
Check Outline darkest, marks lightest, guides gone.
What it looks like finished
The same drawing with every guide erased and only the lines you meant to keep, at the weight you meant them to be. If yours still has centre lines and blocking-in shapes in it, this is the step you have not done yet - and it takes about thirty seconds.
Yours will not look like this, and it is not supposed to. This is the construction with the scaffolding taken away, not a drawing somebody made to be admired - the point is to show you which of your lines were guides.
What this one actually teaches you
What transfers is the standard light kit - core shadow inside the edge, bounced light at it, one small highlight, a cast shadow that anchors. Every shaded form you ever draw uses all four.
The cherry pair is composition at its minimum size: overlap, shared light and size-by-distance on two identical objects. Every still-life you ever attempt is this drawing with more members.
Practise these: Line confidence Proportion Value range
What you need
A pencil and any paper, or a finger on the canvas above - nothing here needs special equipment. Keep the construction light if you are on paper, because the guides come off at the end.
If it's going wrong
If they float apart, the stems are wrong: both stems spring from a SINGLE point at the top, forking down to their fruits like a wishbone.
If the pair looks flat, nothing overlaps: the near cherry must cut across the far one, and the far one darkens where it tucks behind.
If they read as one lumpy mass, the sizes match too well: make the near cherry visibly larger - nearness and size agreeing is what separates them.
Print the steps
Take it away from the screen. The step sheet prints on one page.
Questions people ask
- How do I draw a pair of cherries?
- Two spheres, the near one larger and overlapping the far one, with both stems springing from a single point above like a wishbone. The shared stem point is what joins them.
- Why do my two cherries look like one blob?
- Same size, no overlap. Enlarge the near one, let it cut across the far one, and darken the far cherry where it tucks behind.
- How shiny should a cherry be?
- The shiniest thing in the food set: one small hard white highlight per cherry, same corner on both. It is the one fruit where a crisp highlight is correct.
- Can I draw a cherry on paper instead of the canvas?
- Yes, and for a shading lesson paper is arguably better - a soft pencil gives you more range than a finger on glass. The printable sheet has every step, and a photographed result is measured the same way.
- How do I start drawing a cherry?
- One oval, drawn in a single motion, then correct the silhouette where the real thing differs. The oval is scaffolding, not the outline.
- How do I shade a cherry?
- Pick a light direction and commit, shade in one direction in passes, keep the darkest band just inside the edge, and leave one small off-centre highlight.
- Why does my cherry look flat?
- Almost certainly range - no true dark anywhere and no untouched light left on the page. Go two steps darker than feels safe and leave the highlight alone.
- Can a beginner draw a cherry?
- Yes - it is deliberately one of the simpler forms here, chosen so the shading can be the whole lesson.
- Does a cherry need a cast shadow?
- Yes, always. Without one the form floats on the page however carefully you shaded it. Darkest at the contact point, softer as it stretches away.