How to Draw a Mushroom
1 / 12
Start with one oval for the whole mushroom.
It should fill most of the page with a margin all round.
Op papier te trek in plaas daarvan?
Ons maak die foto reguit en maak dit vir jou skoon, papier tel presies dieselfde
Aangaande hierdie tekening
A mushroom is a dome on a cylinder, which makes it the one food that is really an architecture lesson: the cap overhangs the stem all the way round, casting the stem into shadow, and the gills radiate along the cap's underside like the ribs of an umbrella. It is a lamp, drawn from under the shade.
Underneath, this is a single shaded mass like the apple; the subject lives in the silhouette and the surface marks.
Stap met stap
-
Stap 1
Start with one oval for the whole mushroom.
One shape, one motion. A slightly lopsided mass drawn confidently beats a perfect one assembled from nervous strokes, because you can correct a shape and you cannot un-see hesitation.
Pas op Building the mass from many small safe strokes.
Gaan na It should fill most of the page with a margin all round.
-
Stap 2
Vary the outline so it stops looking geometric.
Nothing organic is a perfect oval. Push the outline in and out where the subject actually does - the asymmetry IS the likeness.
Pas op Leaving the construction oval as the finished outline.
Gaan na The outline should differ visibly from the oval underneath.
-
Stap 3
Mark the centre with two light lines.
Two light lines through the middle are the rulers for everything that follows. Without them the features drift off-centre a few millimetres at a time.
Pas op Skipping the axes because the shape looks simple.
Gaan na The two lines should cross near the middle of the mass.
-
Stap 4
Draw the top of the mushroom.
Whatever sits on top attaches INTO the form, not onto its outline - it comes out of a dip or a mound, and drawing that junction is what attaches it.
Pas op Balancing the stalk on the outline like a hat.
Gaan na The top feature should overlap the mass's outline.
-
Stap 5
Draw the top hollow.
The hollow around the top is what makes the form read as having a top rather than an edge. One curve, and note which way it bows - it tells the viewer where their eye is.
Pas op Omitting the dip so the top sits on a flat line.
Gaan na The dip should curve, not sit flat.
-
Stap 6
Choose the light direction.
Pick a direction and commit. Every decision from here - shading, highlight, cast shadow - follows from this one, and changing your mind halfway is the classic way a drawing ends up lit from two directions.
Pas op Deferring the decision and shading by instinct.
Gaan na You should be able to point at the light source.
-
Stap 7
Shade the dark half.
Work in one direction and build darkness in passes. Scrubbing back and forth gives an even grey - precisely the thing that makes a drawing look flat.
Pas op Scrubbing, and stopping two steps short of dark enough.
Gaan na The dark side should be clearly darker than the mid tone.
-
Stap 8
Leave a light strip at the shadow edge.
Leave a thin lighter strip right at the shadow-side edge - bounced light from the surface below. It is the single cheapest thing that makes a form read as round.
Pas op Running the shading tight to the outline.
Gaan na A lighter line should separate shading from edge.
-
Stap 9
Put one small highlight on the lit side.
One highlight, small, off-centre on the lit side. Two symmetrical highlights read as plastic; a big one reads as wet.
Pas op A large or doubled highlight.
Gaan na The highlight should be smaller than your thumbnail.
-
Stap 10
Draw the mushroom surface.
Surface marks follow the form - they curve over the mass and fade near the highlight. Flat marks cancel the volume you just shaded into it.
Pas op Marks drawn flat across the curved surface.
Gaan na Marks should bend with the surface.
-
Stap 11
Add the cast shadow.
Darkest at the contact point, softer as it stretches away from the light. It anchors the object; without it everything you shaded still floats.
Pas op An even grey puddle not touching the object.
Gaan na The shadow should touch the object's base.
-
Stap 12
Strengthen what stays and erase the guides.
Weight the silhouette, erase the axes and the oval, and leave the interior marks light. The weight difference is what makes it look deliberate.
Pas op Equal weight everywhere.
Gaan na Outline darkest, marks lightest, guides gone.
Wat dit lyk voltooi
Dieselfde tekening met elke gids uitgevee en slegs die lyne wat jy bedoel het om te hou, op die gewig wat jy bedoel het hulle om te wees. As joune nog steeds sentrum lyne en blokvorme daarin het, is dit die stap wat jy nog nie gedoen het nie - en dit neem omtrent dertig sekondes.
Jouwe sal nie so lyk nie, en dit is nie veronderstel om te nie. Dit is die konstruksie met die stellasie wat weggeneem is, nie'n teken wat bewonder moet word nie - die punt is om jou te wys watter van jou lyne gidse was.
Wat hierdie een jou werklik leer
The skill underneath is committing to a light direction before shading anything. Most flat-looking drawings are lit from nowhere in particular, and deciding is the fix.
The mushroom is the family's first self-shadowing form - one part casting shade on another. The stem darkening under the cap is the same logic as the nose's shadow on the lip, met here on a subject with no likeness to protect.
Oefen hierdie: Line confidence Proportion Value range
Wat jy nodig het
A pencil, kept light until the last step, and an eraser you will actually use. The construction is deliberately drawn to be removed.
As dit verkeerd gaan
If the cap looks stuck on, the underside is missing: the cap's lower edge is a visible curve, and the gill lines hang from it, converging toward the stem.
If it looks like a nail, the stem is too thin - a mushroom's stem is stout, between a third and half the cap's width, and it thickens slightly at the ground.
If it floats, the stem's shadow is missing: the cap overhangs, so the top of the stem is always in shade, darkest right under the cap.
Druk die stappe
Neem dit weg van die skerm. Die stap staat druk op een bladsy.
Vrae wat mense vra
- How do I draw mushroom gills?
- As short lines hanging from the cap's underside curve, converging toward the stem - umbrella ribs seen from below. Five or six read as fifty.
- How thick should a mushroom stem be?
- Stout - a third to half the cap's width, thickening slightly at the base. A thin stem turns the mushroom into a nail.
- Why is the top of the stem dark?
- The cap overhangs it all the way round, so the stem stands in the cap's shadow - darkest right under it. Draw that and the two parts lock together.
- Can I draw a mushroom on paper instead of the canvas?
- Yes, and for a shading lesson paper is arguably better - a soft pencil gives you more range than a finger on glass. The printable sheet has every step, and a photographed result is measured the same way.
- How do I start drawing a mushroom?
- One oval, drawn in a single motion, then correct the silhouette where the real thing differs. The oval is scaffolding, not the outline.
- How do I shade a mushroom?
- Pick a light direction and commit, shade in one direction in passes, keep the darkest band just inside the edge, and leave one small off-centre highlight.
- Why does my mushroom look flat?
- Almost certainly range - no true dark anywhere and no untouched light left on the page. Go two steps darker than feels safe and leave the highlight alone.
- Can a beginner draw a mushroom?
- Yes - it is deliberately one of the simpler forms here, chosen so the shading can be the whole lesson.
- Does a mushroom need a cast shadow?
- Yes, always. Without one the form floats on the page however carefully you shaded it. Darkest at the contact point, softer as it stretches away.