How to Draw a Cheetah

পদক্ষেপ অনুসাৰে

1. পদক্ষেপ 1

   Lay in the chest mass as a single oval, drawn in one motion.

   The ribcage is the largest single mass in almost every four-legged animal, and drawing it too small is the most common structural error in the whole category. Draw it in one motion and make it bigger than feels right.

   সাবধান Drawing the chest small to leave room for everything else.

   পৰীক্ষা কৰক The chest oval should take up around a third of the body's length on its own.

2. পদক্ষেপ 2

   Add the pelvis as a second oval, set back from the first.

   The gap between the two masses is information: it is most of what separates a long animal from a compact one. Decide the gap deliberately rather than letting it happen.

   সাবধান Butting the pelvis directly against the chest.

   পৰীক্ষা কৰক You should see clear space between the two ovals.

3. পদক্ষেপ 3

   Join the two ovals with a single spine curve.

   One continuous curve, drawn in one pass. The spine sets the whole animal's attitude, and a spine assembled from three short strokes reads as three different animals stitched together.

   সাবধান Drawing the spine as separate flat segments.

   পৰীক্ষা কৰক The curve should touch both masses without a corner.

4. পদক্ষেপ 4

   Add the head - one oval, plus a guide line back to the body.

   Note where the neck leaves the chest before you place the skull - on most animals it comes off the front of the chest mass, not the top, and that single angle carries the species.

   সাবধান Hanging the head above the body instead of in front of it.

   পৰীক্ষা কৰক The neck guide should leave the FRONT half of the chest oval.

5. পদক্ষেপ 5

   Draw the neck as a solid, not a stick.

   A neck is a solid with real thickness, and on most animals it is thicker than you think - nearly as deep as the head itself. Two curves, one over, one under.

   সাবধান A thin stick neck, which makes any animal look fragile.

   পৰীক্ষা কৰক The neck should be nearly as thick as the head is tall.

6. পদক্ষেপ 6

   Join chest to hips with a topline and a belly line.

   This is where the animal stops being two eggs. Let the topline follow the spine you already drew and keep the belly line taut - a sagging belly is a decision, not an accident.

   সাবধান Ignoring the spine curve you drew and inventing a new back.

   পৰীক্ষা কৰক The topline should agree with the spine curve underneath it.

7. পদক্ষেপ 7

   Draw the belly line underneath.

   The belly is a separate decision from the masses: it hangs below the line joining them, sagging most midway, and how much it sags is part of the animal - taut on a deer, generous on a cow. Draw it as one curve, not two arcs meeting.

   সাবধান A straight line between the ovals, which reads as a table.

   পৰীক্ষা কৰক The belly should dip below both mass bottoms at its middle.

8. পদক্ষেপ 8

   Close the silhouette at both ends.

   Two curves seal the body into one shape: down the front of the chest into the belly, and from the top of the hips around the rump to meet it. Without them the animal has no front or back and the legs float - this is the step that turns parts into a body.

   সাবধান Leaving the ends open because the ovals suggest them.

   পৰীক্ষা কৰক You should be able to trace the whole body without lifting your pen.

9. পদক্ষেপ 9

   Draw the two front legs as chains from shoulder to foot.

   Legs are chains of segments with a joint at each bend, and every leg bends somewhere. Draw joint to joint in straight strokes first; curves come later if at all.

   সাবধান Straight tube legs with no joints, which read as furniture.

   পৰীক্ষা কৰক Each front leg should bend at least once.

10. পদক্ষেপ 10

    Put in the hind pair, bending backwards at the hock.

    The hind legs fold the opposite way to the front pair - the hock points backwards. Compare their length against the front legs rather than judging them alone.

    সাবধান Back legs bending the same way as the front ones.

    পৰীক্ষা কৰক Front and back feet should reach the same ground line.

11. পদক্ষেপ 11

    Put the ears on, high and further back than feels right.

    Ears attach further back on the skull than feels natural, and their shape is one of the strongest species signals you have. Draw the second by comparing it to the first.

    সাবধান Planting the ears on top of the head like handles.

    পৰীক্ষা কৰক Both ears should attach behind the midpoint of the skull.

12. পদক্ষেপ 12

    Build the muzzle and place the eye on it.

    The muzzle projects forward from the lower half of the head mass. Its length relative to the skull is the proportion to measure - it is the one that changes species when you get it wrong.

    সাবধান A muzzle pointing down instead of forward.

    পৰীক্ষা কৰক The eye should sit in the top half of the head mass.

13. পদক্ষেপ 13

    Add the tail and the cheetah markings.

    Detail is suggested, never itemised. Put the marks where they identify the animal and stop early - texture spread evenly everywhere flattens the drawing back out.

    সাবধান Covering the body evenly in fur marks.

    পৰীক্ষা কৰক Step back: the big shapes should still read first.

14. পদক্ষেপ 14

    Build the eye: iris, pupil, one highlight, and the brow.

    An eye is built in layers - iris, pupil inside it, one small highlight, and the brow line above that gives it a direction to look. The highlight and pupil must not touch, and the brow is what turns a circle into a gaze. This one feature carries more life than the rest of the head together.

    সাবধান A single black dot, which reads as a bead.

    পৰীক্ষা কৰক The highlight should sit at the pupil's edge, not inside it.

15. পদক্ষেপ 15

    Give every leg a foot: a base line and a toe split.

    A leg without a foot is a pole. One short base line at the bottom of each leg, angled with the ground, plus a single toe split, and all four legs suddenly bear weight. Feet are also where the ground line will attach, so place all four bases at nearly the same height.

    সাবধান Legs ending in points, or feet at four different heights.

    পৰীক্ষা কৰক All four feet should sit within one pencil-width of the same line.

16. পদক্ষেপ 16

    Anchor it: ground line, then the shadow under the cheetah.

    The ground is one line through the feet, and the cast shadow is one flattened arc beneath the body, darkest between the legs. Together they anchor the animal - without them even a perfect construction floats in white space. Keep the shadow tight under the body; a wide puddle reads as water.

    সাবধান Skipping it, leaving the animal hovering.

    পৰীক্ষা কৰক The shadow should touch at least two of the feet.

17. পদক্ষেপ 17

    Break the clean outline with tufts of coat.

    Fur is an edge event: a few tufts where the coat genuinely hangs - chest, belly, rump - and nowhere else. Each tuft leans the way the coat grows, back and down, and the outline should still read as one body between them. This is also where the sealed construction line stops looking mechanical.

    সাবধান Scalloping the entire outline evenly, which turns any animal into a sheep.

    পৰীক্ষা কৰক Most of the outline should still be smooth between the tufts.

18. পদক্ষেপ 18

    Shade the cheetah - underside first, one direction.

    Two or three patches of parallel strokes - under the belly, behind the shoulder - all leaning the same way, and the drawing suddenly has light in it. Keep the patches small: shading in a sketch is a note about where the dark lives, not a rendering.

    সাবধান Scrubbing tone everywhere, which flattens the sketch it took fifteen steps to build.

    পৰীক্ষা কৰক All the hatch strokes should lean the same direction.

19. পদক্ষেপ 19

    Weight the outline and remove the blocking-in shapes.

    Press harder on the outline and the face, leave the small marks light, and erase the construction ovals. That weight difference is what makes the drawing look decided.

    সাবধান Going over every line at the same weight.

    পৰীক্ষা কৰক The outline should be clearly darker than the interior marks.