How to Draw a Teapot
1 / 12
Mark eye level - everything follows from it.
You should be able to say if you are above or level with the rim.
紙に描くの？
写真を整理して 紙も同じだ
この絵の情報
A teapot is the vessel family's final exam: body, lid, spout and handle, four forms that all have to agree about the same eye level. The classic failure is famous enough to have a name in drawing classes - the spout and handle at different heights, tea physically unable to pour. Check one line: spout tip level with the lid's rim.
The build is the standard vessel one - eye level, rim ellipse, sides, rounder base - with this object's profile and details.
ステップバイステップ
-
ステップ 1
Mark eye level - everything follows from it.
Everything about the ellipses follows from where your eye is. Decide now, consciously, and mark it - letting it drift mid-drawing is how the rim and base end up disagreeing.
気をつけろ Not deciding, then drawing contradictory ellipses.
チェック You should be able to say if you are above or level with the rim.
-
ステップ 2
Add the rim - one fast ellipse.
Round three or four times in one fast continuous motion and keep the best pass. Speed is what makes an ellipse smooth - drawn slowly it lumps on one side every time.
気をつけろ Building the ellipse from four careful arcs.
チェック The rim should be symmetrical about its long axis.
-
ステップ 3
Add the two sides of the teapot.
Start each side exactly at the widest point of the rim ellipse. A step where side meets rim is instantly visible and almost impossible to hide later.
気をつけろ Sides starting inside or outside the rim's ends.
チェック Each side should leave the rim at its widest point.
-
ステップ 4
Put the bottom in.
The base is further from your eye than the rim, so it is ROUNDER - same width, more curve. Getting this backwards is what makes vessels look like they are sliding off the table.
気をつけろ A base flatter than the rim, or a straight line.
チェック The base curve should be rounder than the rim.
-
ステップ 5
Put a second curve just inside the top.
One curve just inside the rim gives the material its thickness and turns the top from a painted disc into an opening. It follows the rim's curve, not parallel all the way round.
気をつけろ Skipping it, leaving a flat disc on top.
チェック A visible band should separate the two curves at the front.
-
ステップ 6
Add the shoulder or neck.
Where the profile changes is where the form lives. Draw the change on both sides at the same height - a shoulder at two heights makes the whole vessel lean.
気をつけろ The profile changing at different heights left and right.
チェック Both sides should change shape at the same height.
-
ステップ 7
Attach the handle.
Both ends must touch the body - a floating handle is the most common error on any vessel. And it is a strap with thickness, never a single line.
気をつけろ A handle drawn as one wire line, or floating.
チェック Both handle ends should touch the vessel's side.
-
ステップ 8
Add the details that say teapot.
The identifying details go on last and they follow the form - a label, a pattern or a spout curves with the surface it sits on.
気をつけろ Flat detail pasted over a round form.
チェック Any pattern should bend with the body.
-
ステップ 9
Shade the side turned away.
A cylinder's darkest band sits just INSIDE the shadow edge, not at it. Lay the strokes vertically, following the form, and build up in passes.
気をつけろ Scrubbing horizontal tone across a vertical form.
チェック The darkest band should sit inside the outline.
-
ステップ 10
Keep a light line right at the dark edge.
Light bounces off the table back onto the very edge, so leave a thin lighter strip at the outline. That strip is what makes the form read as round rather than flat-shaded.
気をつけろ Shading right up to the edge.
チェック A light strip should separate shading from outline.
-
ステップ 11
Draw the shadow it sits in.
Darkest where it touches the base, softening as it spreads. The cast shadow is what anchors the vessel - without it the thing floats no matter how well you shaded it.
気をつけろ A detached grey blob nearby.
チェック The shadow should touch the base.
-
ステップ 12
Darken the final lines and clear the rest.
Weight the rim and the silhouette, erase the eye-level guide, and check the two ellipses one last time - they are what the whole drawing stands on.
気をつけろ Leaving the eye-level line in.
チェック Rim and silhouette should be the darkest lines.
終わったようだ
すべてのガイドラインを消去し、保持する線のみを残す同じ図です。 もし、中央線やブロック形状が残っている場合は、これはまだ行われていないステップで、約 30 秒かかります。
あなたの図はこのようには見えません。 これは足場を取り除いた構造です。誰かが見事に描いた図ではありません。 ポイントは、あなたの線がガイドラインであることを示すことです。
これが教えてくれるのは
What transfers is drawing what an ellipse looks like rather than the circle you know it to be - the clearest possible case of observation beating knowledge.
The teapot teaches multi-form agreement: four attached shapes sharing one perspective. It is the closest thing on this site to drawing a machine, and the spout-height check is a first taste of drawing things that have to work, not just look.
これを実践してください： Line confidence Proportion Value range
必要なもの
A pencil, kept light until the last step, and an eraser you will actually use. The construction is deliberately drawn to be removed.
もし間違ってたら
If the spout looks stuck on, it must grow from low on the body and curve up in one S - and its BASE must be wider than its tip, like a horn, not a pipe.
If the pot cannot pour, raise the spout: its opening has to reach the height of the lid rim, or the physics reads wrong even to people who cannot say why.
If the lid floats, it needs an ellipse of its own sitting IN the pot's rim ellipse - two curves, the pot's and the lid's, with a visible step between them.
ステップを印刷
スクリーンから取り出して ステップシートは１ページ印刷されます
質問
- How high should a teapot's spout reach?
- Its tip must be level with the lid's rim - lower and the pot would pour tea out of the spout while filling. People read that error without knowing why.
- How do I attach a teapot's spout?
- Growing from low on the body, wide at the base and tapering along one S-curve to the tip. A constant-width spout reads as a pipe pushed into the pot.
- How do I draw the teapot's lid?
- As its own smaller ellipse sitting inside the pot's rim ellipse, with a visible step between the two, and a knob on top drawn as a tiny sphere.
- Can I draw a teapot on paper instead of the canvas?
- Yes - print the step sheet and draw beside it. The ellipse practice actually benefits from paper, where your whole arm is free, and a photo of the page gets measured exactly like a canvas drawing.
- How do I draw the top of a teapot?
- As one fast ellipse, going round several times and keeping the best pass. Its roundness depends on your eye level - decide that first.
- Why does my teapot look like it is tipping over?
- The base ellipse disagrees with the rim. The base is always slightly ROUNDER than the rim, never flatter, and both must be the same width.
- Can a beginner draw a teapot?
- Yes, and it is worth it - the ellipse practice transfers directly to wheels, plates, hats and eyes. There is a finish-early step partway through.
- How do I shade a teapot?
- Vertically, following the form, darkest just inside the shadow edge with a thin light strip at the very edge - that strip is what makes it read as round.
- What is the hardest part of drawing a teapot?
- The two ellipses agreeing with each other. Everything else is forgiving; the rim and base are what the eye checks first.